Ax10 Scorpion 1:10 Rock

on the rear to prevent hang-ups on the rocks.Matte chrome 8 hole beadlocks with orange rock rings. Re-use your wheel. No messy glue required.OverviewThe Axial AX10 Scorpion 1/10, 4WD Electric, R/C Rock Crawler... built rolling chassis, and within approximately an hours build-time you'll be able to hit the rocks with your competition ready AX10 Scorpion rock crawler. SpecificationsType: Rock CrawlerScale: 1/10...

Product FeaturesEasily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors availableIncludes rear hi-clearance linksMade from 6061 aluminumRTR requires AXIA1411 hardware pack...

70° of ArticulationUniversal front and rear Drive ShaftsOverviewThe Axial AX10 Scorpion 1/10 Rock Crawler Kit (4WD Electric) is the first of its kind. The kit was designed from the ground up, and every detail... matter of a few hours build-time you'll be able to hit the rocks with your competition ready AX10 Scorpion Rock Crawler!SpecificationsType: Rock CrawlerScale: 1/10Length: 438mm (17.25”)Width: 254mm (10...

to prevent binding; bushing also prevents the shock cap from popping offSpecificationsType: Rock CrawlerScale: 1/10Width: 254mm (10 in)Wheelbase: 316mm - 332mm (12.4 in - 13 in)Weight: 1588 g (3.5 lb... upper link plate to mount smaller batteries lower in the chassis for improved crawling performance55T electric motor: tear up the terrain in-door or out-doors. Easy Operation: no tuning, no fuel, no loud...

SpecificationsForward: YesReverse: YesBrake: YesContinuous Maximum Current: 60AInput Voltage: 5~10 Cell-2VDC/CellMotor Limit: 15T or greaterMomentary Peak Current: 150ADimensions (WxLxH): 33.5 x 34... .8 x 30mmWeight: 53gBEC Voltage: 5VPWM Frequency: 1 K Hertz...

the very popular competition-ready AX10 Kit, the AX10 Scorpion is a Ready-to-Run with 2 configurations. • Rock Crawler: Takin' it slow - swap out the 20T pinion to the 14pt pinion and install the front... Scale: 1/10Width: 10 in (254mm)Wheelbase: 12-12.6 in (304mm-320mm)Weight: 3.5 lb (1588 g)Is Assembly Required: NoNeeded to CompleteRequired Items 7.2V Stick Pack Battery 8 AA Batteries...

Axial RC Part AXIA1162. O-Ring 5x1mm : AX10 (10pcs)....

Axial RC Part AXI30412. Slipper Pad 27x8x1mm : AX10....

..040” polycarbonate body stands up to abuse from the rocks.Offered in clear and pre-printed choices.Fits AX10 Scorpion and most 1/10th scale Rock Crawlers.Pre-printed bodies include body mounts for use on the AX10... the fenders for even more clearance.Side skirt acts as a skid plate when on the rocks and offers increased ground clearance.Scale looks to real 1:1 rock buggies.Extra large photorealistic decal sheet...

buggies.Extra large photorealistic decal sheet..040” polycarbonate body stands up to abuse from the rocksOffered in clear and pre-printed choices.Fits AX10 Scorpion and most 1/10th scale Rock Crawlers... .Pre-printed bodies include body mounts for use on the AX10 Scorpion RTR....

buggies.Extra large photorealistic decal sheet..040” polycarbonate body stands up to abuse from the rocks.Offered in clear and pre-printed choices.Fits AX10 Scorpion and most 1/10th scale Rock Crawlers... .Pre-printed bodies include body mounts for use on the AX10 Scorpion RTR.Designed from the get go as a competition level rock crawling body to allow clearance where needed when crawling....

Product FeaturesEasily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors availableIncludes rear hi-clearance linksAvailable in green, blue, red, and orangeMade from 6061 aluminum...

Product FeaturesEasily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors availableIncludes rear hi-clearance linksAvailable in green, blue, red, and orangeMade from 6061 aluminum...

Product FeaturesEasily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors availableIncludes rear hi-clearance linksAvailable in green, blue, red, and orangeMade from 6061 aluminum...

Axial RC Part AXI30460. Scorpion Universal Joint Axle (2): AX10....

Product FeaturesTurning angle up to 42 degreesHeavy duty hardened steel constructionNo setscrews needed, cross pin held in place by aluminum ringSold in set of two, why buy four when you only need two...

Product FeaturesTurning angle up to 42 degreesHeavy duty hardened steel construction.No setscrews needed, cross pin held in place by aluminum ringSold in set of two, why buy four when you only need tw...

Product FeaturesTurning angle up to 42 degreesHeavy duty hardened steel constructionNo setscrews needed, cross pin held in place by aluminum ringSold in set of two, why buy four when you only need two...

Product FeaturesRelocate electronics using the plate, helps lower center of gravityLightweight aluminum construction black anodized with laser etched logoIncludes plate and 4 zip ties...

Product Features5 different spring rates to choose fromAdjust your articulation to suit your driving styleGrey springs with color reference on endOverviewFine tune the ride of AX10 Scorpion to your...

Axial AX10 Scorpion Locker (compatible with Wheely King)...

Axial Part AXI30483. Scorpion Radio Plate: AX10....

Axial AX10 Scorpion Servo Plate...

Product FeaturesIncludes all the hardware you need to install 4 wheel steering on your AX10 ScorpionImproves the turning radiusGreen anodized aluminum steering shafts are super strong and lightweight...

Product FeaturesEasily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors availableIncludes rear hi-clearance linksMade from 6061 aluminumRTR requires AXA1411 hardware pack...